AirCom 50TH.2 HVLP Series Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rozpylacz farby AirCom 50TH.2 HVLP Series. AirCom 50TH.2 HVLP Series 19 stron. Conventional spray guns
Drukuj stronę50TH.2 series
WARNINGS
CORROSIVE
PRODUCT
WARNINGS
Our guns can be used with the majority
of water, or solvent-based pigments for
coating
and
finishing
surfaces.
However,
designed to spray abrasive and/or
corrosive products. If abrasive and/or
corrosive products are used, guns with
components made of the appropriate
material can be ordered.
MAINTENANCE AND
CLEANING
MAINTENANCE
Before any maintenance work, empty the
gun and disconnect it from both, the
compressed air supply, and the liquid
supply.
Use
only
accessories, spare parts, and related
components: any other product not
supplied by AIRCOM® is not approved or
authorized. AIRCOM® is not liable for any
damage caused by using non-original
spare parts and accessories.
4 - Instruction Manual
all
types
of
they
are
not
original
AIRCOM®
HEALTH HAZARD
Some chemicals, once sprayed, may be
harmful and cause irritation or health
disorders. Careful reading of all labels
and instructions on how to use the
product
are
necessary.
product is restricted to trained technical
personnel, with the use of special safety
glasses when adjusting the gun and,
while the system is operating.
CLEANING
Use
exclusively
appropriate
cleaners with neutral pH 6-8. Do not use
acids, alkaline solutions or other cleaning
agents containing sodium hydroxide,
which are aggressive for cleaning the
exterior of the gun. Do not immerse the
gun in liquid cleaners that may cause
corrosion of the product. Clean all
material passages by propagating water
within
the
paint
circuit:
cleaning can cause damages to the fan
shape. While cleaning, avoid scratching
the surfaces of the air nozzle holes and
the dipstick.
aircom.it
EN
Use
of
the
liquid
inadequate