Dymo LP200 Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenie do tworzenia etykiet Dymo LP200. Dymo LP200 7 stron.
Drukuj stronę
The "B" (BIG FONT) mode will produce highly visible labels
using the entire print height on all except 6mm labels. In "B"
mode, all text will be printed as capitals (without accents).
• To create a label in "B" mode use
cursor under "B" and press
• In "B" mode, you can select between condensed, normal or
extended, but all other options are not available.
JUSTIFY
JUST
Labels are normally printed with the text left-justified. On
2-line labels, press
JUST
justified or centred text, as shown in the display. See
also LABEL LENGTH.
VERTICAL TEXT
VERT
• Rotates the text through 90° so that the label is printed
indicator in the display.
• Press again to cancel and return to horizontal text.
Note: Vertical text is not available on 2-line labels.
MULTI-LINE PRINTING
• Press
to start the next line of text on a 2-line label,
e.g.
This is a two
line label in the display will be
printed as:
This is a two
line label
Labels can be created as follows:
6mm
1 line small text
9mm
Up to 2 lines
small text
9mm
1 line normal text
12mm
Up to 2 lines
small text
12mm 1 line normal text
The line indicator in the display will confirm the number
of lines in the label.
BOXED/UNDERLINED PRINTING
• If no Box/Underline option has been selected, pressing
once will display the menu below:
BOX/UL
Underlined -
—
Square Box -
=
Pointed Box -
Round Corners -
=
ZigZag Box -
Shaded Box -
or
to move the
( BFONT lights in display).
to select left-justified, right-
, as confirmed by the VERT
and the display will
•
indicate 2 lines:
•
BOX/UL
=
DYMO
=
=
=
• Use
option. Either press
by the
• When the
to cancel the Box/Underline option.
LABEL LENGTH
The length is normally calculated automatically,
according to the length of the text on the label.
The label length function displays the last used fixed label
length, eg:
• Press
the length, or:
• Use
inches max.) or decrease the length in 1mm / 0.04 inch
steps, or
10mm / 0.4 inch steps. The minimum fixed label length
is 45mm / 1.8 inch.
• Press
confirmed by the LTH SET indicator in the display.
• Press
automatic length.
• If the fixed length is too short for the text, when you
press
2
3
much longer the label is than the fixed length, eg:
and it will not print. Either cancel the fixed length (see
above), or press
the length; the label is now long enough and can be
printed.
MULTIPLE COPIES
• Your LabelPoint can provide multiple copies within the
range 1-99.
• To use this facility press
number of copies set on the display, for example
the number of copies required, then press
confirm ( COPIES indicator lights in the display). To
print the desired quantity press
• To cancel an existing multiple copies setting, press
+
Note: A row of vertical dots will print between each label
as a cutting guide.
INCREMENTAL NUMBERING
Labels can be printed in increments of 1 automatically.
• Key in your starting number as the right most digit on
the label. Press
automatically move up a digit to the next number.
5
or
to move the cursor under the desired
to select the option (confirmed
or — indicator displayed), or
or — indicator is displayed, press
LTH
45mm
1
10
to exit the length function without changing
DEL
or
to increase (5000mm / 196.85
or
to increase or decrease the length in
to fix the length for all subsequent labels,
to cancel the fixed length and restore the
LTH
PREVIEW
or
+
the display will show how
PRINT
CAPS
twice and use
LTH
COPIES
+
STYLE
then
# = 03
. Use
or
COPIES
.
STYLE
then
PRINT
to exit .
DEL
BOX/UL
to increase
COPIES
to show the last
STYLE
to increase or decrease
to
.
PRINT
the display will