5Core 5C AMP Podręcznik operacyjny - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik operacyjny dla Wzmacniacz 5Core 5C AMP. 5Core 5C AMP 4 stron. Pa amplifier
Safety Instructions
• WATER AND MOISTURE: In order to prevent any re or shock hazard, do not expose this equipment to rain or
moisture.
• POWER SOURCE: The equipment should be connected to a 220-240V 50/60Hz or 12V DC power source.
• POWER CORD PROTECTION: Do not cut, kink, damage or modify the power cord supplied with the equipment,
keep the power supply cord away from heaters and harmful chemicals. Do not place heavy objects on the power
cord.
• Operation on Generator: When operating the Amplier on a generator, make sure it is switched 'OFF' till the
generator voltage has stabilized and then only switch the amplier 'ON'.
• VENTILATION: The amplier should be situated so that its location or position does not interfere with its proper
ventilation, Also do not insert or drop anything into the ventilation holes.
• PREVENTION OF LOSS IN SPEAKER CABLES: Always use thick cables for low impedance speakers
connections, Use of cable type 23/38 or thicker is recommended as heavy current ow through the cables.
• PROPER SELECTION OF OUTPUT TERMINALS: When 70v/100V line is used, do not connect speakers 4Ω/8Ω/16Ω
(low impedance) tap. Similarly do not connect speakers to 70V/100V line when 4Ω/8Ω/16Ω tap is being used.
• GROUNDING OR EARTHING: The equipment must be earthed properly before operating it to avoid electric shock.
A wire from the earth terminal must be connected to either water pipe or to electrical earth for safe operation.
Specifications
Power Source
Power Output
Output regulation
Input/Sensitivities
Frequency Response
Tone Controls
Signal to Noise ratio
Output
Speaker output
Dimensions
Weight
M5400913IN
ISO 9001:2015
CERTIFICATE NO.: 16RQ07AY
AC:220-240V 50/60Hz
DC:12V (Car battery)
160 Watts RMS Max,
120 Watts RMS at 10% THD,
105 Watts RMS at 5% THD
≤
2db, no load to full load at 1kHz
5xMIC 0.60mV/4.7kΩ
1xAux 100mV/470kΩ
50Hz-15,000hz ±3db
BASS:- ±8db at 100Hz
TREBLE:±8db at 10kHz
60db
Pre-Amp 200mV/600Ω, Line 1V/1kΩ
4Ω, 8Ω, 16Ω , 70V & 100V
(W415 x H132 x D280)MM
9.500Kg
Thanks for using amplifiers.
For any assistance/suggestion
visit us at www.5core.com
MADE IN INDIA