Dymo LabelWriter 330 Podręcznik uzupełniający

Przeglądaj online lub pobierz pdf Podręcznik uzupełniający dla Oprogramowanie Dymo LabelWriter 330. Dymo LabelWriter 330 5 stron. Enhancing image quality output using labelwriter 300 series printer

Drukuj stronę

Enhancing image quality output

using a LabelWriter 300 series printer

Purpose

Paper and Print Head

Format of Graphic

Enhance Your Image

The purpose of this document is to outline the many steps that

can be taken to ensure the best possible output quality of

images and graphics when printing on a LabelWriter 300 series

printer. These printers include the LabelWriter 300,

LabelWriter 310, LabelWriter 315, LabelWriter 320,

LabelWriter 330 and LabelWriter 330 Turbo. The document

assumes that the LabelWriter printer is functioning properly

and that the most current version of DYMO LabelWriter

Software (DLS) is installed on the host computer.

Two things that are very easy to overlook when examining the factors effecting print quality with a

LabelWriter are the paper and the condition of the print head. First, make sure you are using new

label stock that has been properly stored. Labels that are old and/or have been exposed to heat or

direct sunlight will adversely affect the quality of any printed information. Similarly, the condition

of the print head will also have an effect. The print head should be clean and free from dust and

dirt. To be sure a print head is clean, a DYMO LabelWriter Cleaning Card should be run through

the printer before printing.

DLS supports the importing of several different kinds of graphic formats. The most common

are: JPG, BMP, TIF and GIF. While all of the different formats yield similar quality when

printing, there are certain attributes of the graphics that are preferable. First and most

important is that the graphic or photograph is not color, they must beconverted to black

and white. Graphics that are not converted will always decrease the overall quality of the

output. Therefore it is recommended that graphics be monochrome ex: line drawings

(See Figure 1) or greyscale for photographics (See Figure 2).

Figure 1.

Figure 2.

Chapter 1