Dymond RS Milzar Prestige II Series Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy Dymond RS Milzar Prestige II Series. Dymond RS Milzar Prestige II Series 2 stron.

Drukuj stronę

MANUAL TESTING RANGE

Manual testing can be used under all conditions (temperatures and stone size).

Before testing a stone set the Range Indicator (2) to the correct calibration position with the Range Adj. (3). The correct

position is selected from the calibration chart below.

surrounding temperature.

GREEN LAMPS

YELLOW LAMPS

CALIBRATION CHART

(Heat conductivity is affected by surrounding temperature and stone size.)

Less than

0.06ct.

STONE

0.06ct –

SIZE

0.5ct

(any shape)

More than

0.5ct

Under 0.06ct., set the Range Indicator Lamp to light on up to 6.

From 0.06ct. to 0.5ct, set the Range Indicator Lamp to light up to 4.

Over 0.5ct., set the Range Indicator Lamp to light on up to 2.

For example, when testing a stone of about 0.3 carat in colder

temperatures, set the Range Indicator Lamp to light on 3 and in warmer

temperatures set it to light on 5.

HELPFUL HINTS



If the red Low Battery lamp remains on after twenty seconds replace battery.



Stones being worn, which may be well above room temperature can be tested immediately using the manual mode.

Simply set the range set point one lamp number greater than what the calibration chart indicates or allow the stone to

return to room temperature before testing.



When testing a small stone avoid incidental heating of the stone by the probe; make good contact against the stone

on the first test attempt, otherwise allow the stone to return to room temperature before retesting.

Observation of display activity allows user to determine a number of things: a) Diamonds cause rapid "movement up

the display" and large diamonds "move all the way to lamp eleven quickly. b) Cubic Zirconias hardly "move up the

display" at all. c) Other semi-precious gems consistently "move up the display" various "distances" based on their

size. d) The only stone that comes close to reading as a diamond is the large sapphire or ruby (corundum). It

"moves up the range" very slowly compared to diamond and the slow movement is a further indication of sapphire.

Also the kind of color usually allows easy rejection of colored sapphires. Large white sapphires can approach the

diamond range but these stones can easily be rejected because they do not "sparkle" as diamonds do under normal

incandescent lighting.

Selection of the calibration is based on the stone size and

RED LAMPS

10 11 12

SURROUNDING TEMPERATURE

10 C – 30 C

Under 10 C

Over 30 C

50 F – 85 F

Under 50 F

Over 50 F

INTERPRETING THE INDICATION

METAL ALERT

DIAMOND

SIMULANTS

DIAMONDS

MAINTENANCE



Always place the protective cover over the probe immediately after use. Probe tip damage is not covered in the warranty.



The only maintenance required is: (1.) cleaning the probe tip and (2) battery replacement.

SPECIFICATIONS

MODEL

POWER SOURCE

NET WEIGHT

ACCESSORIES

WARRANTY

Dymond, Inc. provides that each Diamond Tech Pro will be free from defects in material and workmanship for a period of two years

from the date of purchase. (Batteries and Probe Tip are not included in Warranty.) This warranty becomes void by:

1. Unauthorized repair, misuse, modification, alteration, tampering or breaking any factory seal.

2. Accidental damage, neglect or improper use.

Dymond, Inc. shall not be held legally liable or responsible for any error in display indication or the interpretation thereof in the

identification of any stones, minerals, gems or gemstones by the Diamond Tech Pro.

WARRANTY SERVICE

Should the Diamond Tech Pro require warranty service write or call Dymond, Inc. for a return material authorization (RMA). Be prepared

to provide proof of purchase. Pack the Diamond Tech Pro securely along with a description of the malfunction or problem and return unit

freight pre-paid to the address below.

Dymond, Inc.

3307 Industrial 25th Street

Fort Pierce, FL 34946

Phone (772) 429-0045

Fax (772) 429-0170

The sounding of a continuous audible tone indicates that the

probe tip is in contact with either the users hand, the setting,

or the testing platform. The "Tone" is also accompanied by

the display being momentarily turned off. The remedy is to

reposition the probe tip as described under "Auto" Test

section.

When testing Cubic Zirconiums, "Paste", Strass and other

diamond simulants no illumination of the green diamond

lamp will be observed.

However, some diamond simulants may light one yellow

lamp beyond the initial set point.

As always some stones require further testing to

determine what they are. In the case of some

Moissanite Stones especially the "Forever One"

Moissanite stone try using UV lignt on the stone while

testing will help like the ones used for counterfeit

money e.t.c.

Testing of a genuine diamond will cause the green diamond

lamp to flash (along with the red error light) and a

discontinuous beeping (beep- beep-beep) will sound.

DIAMOND TECH PRO

9 VOLT BATTERY NEDA SIZE 1604 (006P)

105 GRAMS 3.7 OZ.

TESTING PLATFORM (BATTERY INCLUDED) DOES NOT COME WITH A CASE.