Gadhouse HENRY Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Gramofon Gadhouse HENRY. Gadhouse HENRY 13 stron.

Once the tonearm is correctly balanced return it to its' rest. Hold the

Counterweight without moving it, and gently rotate the Down force Scale

ring until the zero is in line with black line on the rear of the tonearm.

Check whether the arm still balances out.

Rotate the counterweight counter clockwise (seen from the front) to

adjust the down force according to the cartridge manufacturer's recom-

mendations. One mark on the scale represents 0.05g of down force.

NOTE: The recommended down force for the factory ﬁtted cartridge

is 3.5±0.5g.

ANTI SKATE FORCE ADJUSTMENT

The anti-skating force must be adjusted corresponding to the tracking

force as follows:

Tracking Force

Groove in the stick

5-10 mN

1st from bearing ring

10-15 mN

2nd from the bearing ring

15-20 mN

3rd from the bearing ring

20mN and bigger

4th from the bearing ring

1.Slip the loop of the anti-skating

weight's thread over the 3rd

groove of the stick to set correct

anti-skating force for the

factory-ﬁtted cartridge.

SPEAKER CONNECTION

The spring clip speaker terminals deliver ampliﬁed, speaker-level signals

as output and should be connected with the passive speakers. The Red

plug connects with the Right channel and the White plug connects with

the Left channel.

Press the Power Switch to turn on the power.

2. Press the MODE button to choose turntable mode, the indicator will

light in red.

3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

4. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is

in place whenever the turntable is being moved or cleaned.

5. Open the tonearm clip from left to right.

6. Press the PLAY / STOP button once, the platter start turning.

2.Feed the thread through the loop

of the wire hanger.