5five F26R Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Odbiornik samochodowy 5five F26R. 5five F26R 20 stron. Car aux /usb/microsd receiver with bt function

Drukuj stronę

D A T E A N D T I M E S E T T I N G S

To display the clock on the screen press CLK button. To set the current time,

press and hold CLK. The hour numbers will blink. The digital value is set by

rotating the volume control. Press the parameter select button to go to the

minute setting; numbers meaning minutes will blink. Rotate the VOLUME

knob to adjust the minutes. Click on CLK button to confirm the clock setting.

R A D I O M O D E

F R E Q U E N C Y R A N G E S E L E C T I O N

In radio mode, press the BND button repeatedly to select required range.

Switching occurs in the following order: FM1> FM2> FM3

Auto Radio Tuning

Press and hold the AMS button for several seconds. The automatic scanning

of the radio range and storing of the found stations in the device memory

will begin. After scanning, listening to the first radio station found will begin.

Introductory listening

Briefly press the AMS button. Sequential playback starts for 6 seconds. each

of the 18 preset radio stations.

Manual tuning of the radio

To search and tune in radio stations manually, press the

scan the band backward or forward, respectively. The found radio station

can be entered into the memory cell by pressing and holding one of the

digital buttons 1 - 6. This default setting is made in AUTO mode. Press and

hold the button

allows you to change the frequency in 0.1 MHz steps.

Switch to saved radio stations

Briefly press one of the number buttons 1 - 6 to switch to the radio station

stored under this number in the current frequency range.

M E D I A P L A Y E R

There is a USB interface on the front side of the device. To the USB connector

a USB flash drive can be connected. When connecting a USB flash drive to

the USB interface, the receiver switches to USB mode by default regardless

of current mode and starts searching for supported audio files on the flash

drive. When files are found, playback will start. When USB flash drive

connected to activate the USB mode, press the button

until "USB" appears on the display of the unit.

until MANUAL appears. Manual tuning mode

button to

repeatedly,