DAW Industries EZ-Access DAWSKIN Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt medyczny DAW Industries EZ-Access DAWSKIN. DAW Industries EZ-Access DAWSKIN 8 stron.
Drukuj stronę
STEP
1
GLUE FOAM COVER TO FOOT SHELL
Experience shows that this DAWSKIN WILL TEAR
at the Heel if the Foam Cover is not securely &
For active patients, or those with hydraulic ankles, ensure a lasting bond remains
between the Foam Cover & the Foot Shell by tapering the top of the Foot Shell and
the inside of the distal end of the Foam Cover.
Follow These Recommended Steps:
1. Be sure to cut Foam Cover longer. Add 1/2" to 3/4" (1.5 cm to 2 cm)
additional length so that it will overlap to top edge of the Foot Shell.
2. Taper inside of distal end of Foam Cover at a 45° angle.
3. Grind square edge of top portion of foot at 45° angle.
4. Glue foam completely to angled top edge of Foot Shell
with barge/poly-adhesive glue.
5. Grind foam for a smooth transition of foot to ankle.
DAW
DAW
Industries
permanently glued onto the Foot Shell.
®
Technical Support (800) 242-8669
© Copyright 2021, DAW Industries, San Diego, CA, All Rights Reserved 07162021
Pg. 2
www.daw-usa.com
•