GRE LEDRC Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt oświetleniowy GRE LEDRC. GRE LEDRC 17 stron. Color led projector, white led projector

Drukuj stronę

WARNING

IMPORTANT SAFETY INSTRUCTIONS.

READ AND FOLLOW ALL INSTRUCTIONS.

WARNING: Only adults should assemble and

disassemble this product.

NOTE: Please examine and verify all

components are present before use. Notify at

the customer service address listed on this

manual for any damaged or missing parts at

the time of purchase.

NOTE: Drawings are for illustration purposes

only and may not reflect actual product.

Drawings are not to scale.

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

Lightness adjustment

Filter Pump/Sand Filter Compatibility:

ASSEMBLY

1. For pools equipped with connection

valves (See Fig.1) Unplug the filter

pump/sand filter, unscrew the

debris screen from the inside of the

pool's inlet valve. A and screw the

pool light onto the inlet valve.

2. For pools equipped with stopper

plugs (See Fig 2) Unplug the filter

pump/sand filter, remove the debris

screen from the inside of the pool's

inlet valve A and insert the adapter,

screw the pool light onto the

adapter.

OPERATION

1. Plug in the filter pump/sand filter to activate the

pool light.

2. When the pool light is flashing or does not work,

rotate the control ring to adjust the lightness. (See

Fig.3)

Rotate the control ring dial to

increase.

Rotate the control ring dial to

decrease.

NOTE: If pool light used with pumps flow rate over

5,678 L (1,500 gallons), lightness will not change with

the adjustment.

NOTE: Ensure pool light is assembled to the inlet

valve A of the pool.

NOTE: When used with sand filter, sand filter must be

performed back wash first, after circulating 5 to 10

minutes, and then assemble the pool light.

STORAGE

1. Disassemble the product.

2. Store in a warm dry place.

Rotate the control ring to adjust the lightness

3,028 L/h (800 gal/h) flow rate and above

lightness will