Gage CompuScope 1220 Instrukcja obsługi sprzętu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Przyrządy pomiarowe Gage CompuScope 1220. Gage CompuScope 1220 17 stron.
Drukuj stronęWhat you should receive with your CompuScope 1220
If you order an independent CompuScope 1220 card, you should receive the following articles:
•
CompuScope 1220 card. You should notice the configuration of the BNC connectors on the face plate
of your CompuScope 1220 card.
If you purchased a CompuScope 1220-4M or CompuScope 1220-8M card, you should see a piggyback
memory board attached to the back of the card, as shown below.
If you purchased a CompuScope 1220 card with 64M, 256M, 512M or 1G acquisition memory, you
should see a full-length piggyback memory board attached to the back of the card, as shown below.
You should also receive one Y-cable for powering the piggyback memory board (also known as Deep
Memory Board).
4
CompuScope 1220