Gage CS1220 Instrukcja obsługi sprzętu - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Przyrządy pomiarowe Gage CS1220. Gage CS1220 17 stron.

•

If you ordered Master or Slave upgrades with your CompuScope 1220 cards, you will receive one of the

following Master/Slave Timing Modules (actual Master/Slave Timing Module may not be exactly as

shown).

2 Slot

Master/Slave

Timing Module

2-Slot Master/Slave Timing Module is used for:

2-Card Master/Slave system of CS1220-1M

4 Slot

Master/Slave

Timing Module

4-Slot Master/Slave Timing Module is used for:

4-Card Master/Slave system of CS1220-1M

2-Card Master/Slave system of CS1220-4M or CS1220-8M

8 Slot

Master/Slave

Timing Module

8-Slot Master/Slave Timing Module is used for:

6-or 8-Card Master/Slave system of CS1220-1M

3-or 4-Card Master/Slave system of CS1220-4M or CS1220-8M

2-or 3-Card Master/Slave system of CS1220-64M, CS1220-256M, CS1220-512M or CS1220-1G

Carefully inspect these articles before proceeding further. If you find any damage caused by transportation,

please report it to the organization from which you purchased the CompuScope card.

CompuScope 1220