Gage Bilt GB704 Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Elektronarzędzie Gage Bilt GB704. Gage Bilt GB704 13 stron. Installation tool
Również dla Gage Bilt GB704: Podręcznik (14 strony), Oryginalna instrukcja obsługi (20 strony)

Drukuj stronę

HEAD

Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assy (704108).

WARNING:

Dispose of hydraulic oil in accordance with applicable regulations.

Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704108). Be careful not

to damage threads or cause burrs on polished piston surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque the

button head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

GB704 S/N: 3213 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

6/11 Rev. 9/14