Grease Guardian D1 Instrukcja instalacji, obsługi i konserwacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Urządzenia przemysłowe Grease Guardian D1. Grease Guardian D1 15 stron. Automatic grease removal unit
Drukuj stronę
CONTROLLER ADDITIONAL SETTINGS:
TIME RESET AND 7 DAY SETTING
Time of day Set
From the main display access the above display
by pressing OK and ESC together. Choose
"Miscellaneous" using - or + keys then press OK
In the follow on display use the + and - keys to
move the flashing bar to select "CLOCK". Press OK to
confirm.
Next, use the + and - keys to select "DATE/HOUR
SETUP", and press OK
Use the + and - keys to move the flashing bar to
select current hour and minutes blocks. Enter and
change these digits by pressing OK, then use + and
- keys to increase/decrease values. Press OK to
confirm current value. Press ESC to save and return
to home display.
10
7 day ON/OFF Control
From the main display access the above display by
pressing OK and ESC together. Choose "Parameter"
using - or + keys then press OK
The display to the left will show. Next using only the
"-" key move the cursor to the "D:MTWTFSS" block
(days of week). To access particular day value press
OK. Then press "-" to cancel any day. Pressing OK
confirms cancellation and moves the cursor to the
next day. On reaching final Day value, S, press OK to
confirm all.
Example: Controller set to OFF at weekends; the
display is configured as shown left. Press ESC to exit
to home display
11