Gage Bilt GB745SH Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Elektronarzędzie Gage Bilt GB745SH. Gage Bilt GB745SH 14 stron. Installation tool

Drukuj stronę

PRINCIPLE OF OPERATION

When the actuator lever assy is depressed, the pressurized air inside of the tool is released allowing spring
pressure to move the valve spool assy causing the air to be redirected. The air is directed to the top of the air
piston assy, moving it in a downward direction. The air below the air piston assy is then directed through the
valve sleeve and exhausted out of the bottom of the tool. Simultaneously, the piston rod assy connected to
the air piston assy is also moving down, forcing hydraulic oil up and into the front side of the head cylinder
assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the
attached nose assembly are also moving with the piston to start the fastener installation. When the fastener
installation is completed, the actuator lever assy is released. Air pressure is then built up inside of the handle
assy causing the valve spool assy to return to its original position and reversing the sequence directing air
pressure to the rear of the head cylinder assy, causing the piston to move to the forward position.
CYLINDER
PRESSURE
HEAD
HEAD
PISTON
OIL
PRESSURE
AIR
PRESSURE
AIR
PISTON
REAR POSITION
S/N: 1033 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
OIL
PISTON
ROD
AIR
PRESSURE
EXHAUST
Image may not reflect actual tool
OIL
PRESSURE
AIR
PRESSURE
AIR
PISTON
VALVE
SPOOL
4
OIL
PRESSURE
AIR
PRESSURE
FORWARD POSITION
AIR
PRESSURE
7/12 REV. 8/14