Gage Bilt 1090 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Narzędzia do nitów Gage Bilt 1090. Gage Bilt 1090 14 stron.

Gage Bilt 1090 Podręcznik

PRINCIPLE OF OPERATION

When the lever assembly is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the valve
spool assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward direction. The
air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool. Simultaneously, the
piston rod assy connected to the air piston assy is also moving down, forcing hydraulic oil up and into the front side of the head
cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the attached nose
assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed, the lever
assembly is released. Air pressure is then built up inside of the handle causing the valve spool assy to return to its original position
and reversing the sequence directing air pressure to the rear of the head cylinder assy, causing the piston to move to the forward
position.
CYLINDER
HEAD
HEAD
PISTON
AIR
PRESSURE
OIL
PRESSURE
AIR
PRESSURE
PISTON
ROD
AIR
PISTON
AIR
AIR
PRESSURE
PRESSURE
VALVE
SPOOL
AIR
PISTON
AIR
AIR
PRESSURE
PRESSURE
AIR
PRESSURE
EXHAUST
Image may not reflect actual tool
S/N: 1090 AND ABOVE
4
Rev. 11/14
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.