Gage Bilt GB704 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Narzędzia do nitów Gage Bilt GB704. Gage Bilt GB704 14 stron. Installation tool
Również dla Gage Bilt GB704: Instrukcja instalacji (13 strony), Oryginalna instrukcja obsługi (20 strony)

Drukuj stronę

PRINCIPLE OF OPERATION

When the lever assembly is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the valve

spool assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward direction. The

air below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool. Simultaneously, the

piston rod assy connected to the air piston assy is also moving down, forcing hydraulic oil up and into the front side of the head

cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the attached nose

assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed, the lever

assembly is released. Air pressure is then built up inside of the handle causing the valve spool assy to return to its original position

and reversing the sequence directing air pressure to the rear of the head cylinder assy, causing the piston to move to the forward

position.

CYLINDER

HEAD

PISTON

AIR

PRESSURE

OIL

PRESSURE

AIR

PRESSURE

PISTON

ROD

AIR

PISTON

AIR

PRESSURE

VALVE

SPOOL

AIR

PISTON

AIR

PRESSURE

AIR

PRESSURE

EXHAUST

Image may not reflect actual tool

S/N: 1090 AND ABOVE

Rev. 11/14

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.