HI tecnologia P7C Instrukcja połączenia - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Kontroler HI tecnologia P7C. HI tecnologia P7C 8 stron.

User Manual - P7C Controller

Note: The modules can have lever connectors (for the new modules) or screw connectors.

Termination Module – BBT260

The termination module must be, obligatorily, connected to the last expansion rack or, if it does not

exist, then it must be connected to the main rack.

IMPORTANT:

The equipment does not work without the termination module;

The module can not be connected and/or disconnected with the equipment turned on. Make

sure the equipment is turned off before any opperation;

Fixing the Rack on trails

To fix the rack on the trail is necessary to fit the rack lower part (as indicated by number 1, at the

picture), pushing from the bottom to the top. To put the rack in the trail just fit the lower part of the

rack (as indicated by number 1 at the picture), pushing to the top and at the direction of the trail (as

indicated by number 2 at the picture):

1 - Check the Notes and Acronysms List at the beggining of this document

Ref.: PMU107001

Version: 1.0.07

Release: 10/20/10

Technical Specifications