Hi-Capacity CH-5901 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ładowarka Hi-Capacity CH-5901. Hi-Capacity CH-5901 3 stron.

1. Introduction

This advanced battery charger is designed to charge the Apple iBook Dual USB battery

pack. It provides an excellent way of charging this battery pack safely and conveniently

outside of the notebook. The charger has two bays and is capable of charging two bat-

tery packs simultaneously. An LED display in each bay provides information on the

charging status.

2. Safety Instructions

This battery charger is designed and built to the highest safety standards and will protect

the user from shock and other hazards when used as directed. The charger contains

high voltage circuits; it is therefore important for users to read the following instructions

carefully.

• Do not attempt to charge non-rechargeable batteries including alkaline, carbon-

zinc, or non-rechargeable lithium.

• Remove all batteries from the charger before plugging the AC adapter into the wall

socket.

• Make sure battery contacts are clean and there is no debris in the charger.

• Do not short-circuit the charger's contacts with metal objects.

• Use only with the AC adapter provided.

• Make sure the battery is placed tightly in the bay to ensure a good connection.

• Pay attention to the charging status LED and discontinue charging if it shows an

error signal (refer to section 3.3).

• Always store the charger in a cool and dry place.

3. Operation

3.1. To power the battery charger, connect the barrel shaped plug into the back of

the charger and plug the AC connector of the adapter into a properly grounded

outlet.

3.2. Insert a battery pack into either bay. The battery's charging time will vary

according to its charge status and capacity.

LED state

Solid Red

Solid Green

Blinking Red Pack voltage < 10V OR Pack temperature> 117.5ºF (47.5°C) OR

Note: The blinking red LED indicates that one of the above fault conditions may exist.

First remove the battery from the charger bay and re-insert it to confirm that a fault con-

dition exists. While the LED is blinking red the charger is not charging the battery. If the

LED continues to blink red, remove the battery from the charger bay and disconnect the

AC power from the charger.

www.Hi-Capacity.com - CH-5901

Meaning

Charging

Fully Charged. Charging is complete

Constant charging time for one battery > 120mins (Remove and

re-insert to confirm)