Dyna-Glo RMC-55R7B Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka gazowa Dyna-Glo RMC-55R7B. Dyna-Glo RMC-55R7B 20 stron. Portable kerosene heater
Również dla Dyna-Glo RMC-55R7B: Instrukcja obsługi (20 strony)

Drukuj stronę

1. Automatic Ignition System
2. Wick Maintenance
3. Wick Replacement
4. Wick Adjuster Mechanism
5. Trouble Shooting Guide
6. Parts List

Reinstall the wind cover.

Tighten 5 screws on the

cabinet

Install the batteries in the battery case, and fill the Cartridge tank with clean, pure kerosene. Set the tank into the

heater and wait at least 60 minutes for the new wick to fully saturate with kerosene.

Remove the wick adjusting knob

once again, if it was reinstalled

before.

Step 22

Reinstall the chimney and the

cartridge tank.

Step 25

Step 23

Step 26

Reinstall the cabinet.

Reinstall the wick adjusting

knob. Close the front grille.

Step 24

Step 27