Dyna-Glo RMC-FA150NGDGD Instrukcja obsługi i instrukcja części - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instrukcja części dla Grzałka gazowa Dyna-Glo RMC-FA150NGDGD. Dyna-Glo RMC-FA150NGDGD 10 stron. Natural gas construction heater
Również dla Dyna-Glo RMC-FA150NGDGD: Instrukcja obsługi i instrukcja części (11 strony)

Drukuj stronę

Dyna-Glo Delux Operating Instructions and Parts Manual

Dyna-Glo

Construction Heater

Troubleshooting Chart

Symptom

Fan does not turn when

electrical connection is

made

Heater will not fire

Heater quits while

running

Always be sure to follow proper maintenance procedures, by cleaning the heater once per month during regular usage, and

check spark gap at least once per season.

For Technical Support or Troubleshooting, Call: 1-877-447-4768, 8:30 am - 4:30 pm CST

Delux Natural Gas

Possible Cause(s)

1. No electric power to heater

2. Fan blade contacts inside of heater

housing

3. Fan blade(s) bent

4. Fan motor defective

1. No spark at igniter

2. Improper spark gap

3. Bad electrode

1. Internal temperature too high causing

limit switch to shut down operation

2. Damaged control valve

3. Dust or debris build-up inside of heater

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!

Corrective Action

1. Check current to electric outlet. If voltage is

correct, check power cord and extension cord for

cuts and breaks

2. Be sure that housing is not damaged. Make sure

there are no obstructions to the fan

3. Straighten blade(s) to match others

4. Replace motor

1. Check igniter wire. Reattach or tighten if loose.

Check spark module. Replace if necessary. Check

all electrical components

2. Set gap to 0.12" (3 mm)

3. Replace spark plug

1. If the heaters output is restricted, internal temp-

era ture becomes too high. Move heater away

from any obstructions

2. Replace control valve

3. Clean inside of heater

RMC-FA150NGDGD