HI-FOG 1900 Procedura identyfikacji i korekty - Strona 6
Przeglądaj online lub pobierz pdf Procedura identyfikacji i korekty dla System nawadniania HI-FOG 1900. HI-FOG 1900 18 stron. A1000 type assembly body with stop valve
Drukuj stronę18/09/2017
• Ladder
• Scaffolding where needed
Sprinkler key
item code M11015
Section valve test hose item code
4.2. Preparations
Note: HI-FOG 1900 sprinklers can also be found as spare parts in storage.
Make sure that also the spare HI-FOG 1900 sprinklers are included in the
work plan.
Identify and log the location of all installed HI-FOG 1900 sprinklers. Use the HI-
FOG sprinkler layout drawings as indication of potential locations of HI-FOG
1900 sprinklers (remember that HI-FOG 1900 sprinklers are replacements of HI-
FOG 1000 sprinklers) and confirm the type visually (see Chapter 2 for details).
Identify and log the type of assembly body whenever possible by visual
inspection (see Chapter 3 for details).
After mapping the location of all potentially affected HI-FOG 1900 sprinklers
which are mounted to A1000 type Assembly bodies, prepare a work plan that will
assure all affected sprinklers will be taken into account when performing the
corrective actions.
Before starting the work, inform the bridge and ECR that the HI-FOG system is
partly out of operation during corrective actions to avoid accidental alarms!
Document number 0003301084
D23050
Figure 05 : Tools
Ver. A
Sprinkler dismounting
tool item code W-
0010888
Section valve test
hose item code
D23040
Flushing hose
item code M14510
O-Rings assembly
tool item code
2000297565
Page 6 of 18