Hi-Force ATDP63 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Hi-Force ATDP63. Hi-Force ATDP63 15 stron. Air driven hydrotest pumps
Również dla Hi-Force ATDP63: Instrukcja obsługi (9 strony)

Drukuj stronę

Max air consumption:

6 m³ (212scfm) at 7 bar.

A minimum supply pipe bore of ½" diameter is required to allow the pump to operate correctly.

Fluid inlet port:

1" BSP (All models)

Outlet Port:

ATDP63 = ½" NPT

ATDP125 = ½" NPT

ATDP216 = 1.1/8" -12 UNF

Pump operating temperatures:

-20c to +50c

Noise level:

An average A-Weighted sound pressure level of 75dB was measured for undefined workspaces, as per

Directive 2006/42/EC Section 1.7.4.2 (u).

Recommended Fluids:

• De-ironised / De-minerelised water.

• Water Glycol

• Hydraulic oil (see chart below)

Hi-Force tools use 2 grades of hydraulic oil, dependant on the tool.

ISO Hydraulic oil grade

ISO15

ISO46

IMPORTANT:

If in doubt about the suitability of the operating fluid you intend to use, please consult

your nearest Hi-Force office or distributor. Use of unsuitable operating fluids WILL void your

warranty.

Operating Instruction Manual:

OM-ATDP-01

1.0 Specifications

Temperature range Degrees Celcius

From:

-23

-2

From Serial Number:

All

To: