Dyna-Glo DGY784BDP-D Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Alarm dymowy Dyna-Glo DGY784BDP-D. Dyna-Glo DGY784BDP-D 15 stron. Vertical gas smoker

ASSEMBLY INSTRUCTIONS

3. Attach the smoke stack.

CAUTION: This unit is HEAVY! Do not

attempt this step without assistance!

Close the two doors. With the assistance of

a helper, stand the unit upright on its legs on

a firm and level surface. (Make sure that the

burner/control unit and legs are attached). Open

the upper door. Position the smoke stack (H)

with control arm to the left as shown.

Attach the smoke stack (H) by using 4 screws (AA).

Securely tighten with a Phillips screwdriver.

Hardware Used

M6x12 Screw

4. Install the cooking grate supports.

Insert the cooking grate supports (Q) into the

corresponding holes on rack of the shelf inside

the smoker body (I) from the bottom up.

NOTE: There are 8 positions to install the

cooking grate supports. The cooking grate

supports can be installed into positions

according to the need of the owner.

Control

arm