6K Products DH0653 30G24 Instrukcja obsługi i części - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi i części dla Piła 6K Products DH0653 30G24. 6K Products DH0653 30G24 12 stron.
Drukuj stronę
After assembling the components as shown in figure 2, position the saw bar square to the log, at the correct height
with clearance between the bar plate and the side of the largest log and weld down solidly (Fig. 3). The dimensions
in figure 3 can be changed as required for your installation. You will need to fabricate and position a lever to feed
the saw through the cut and return it to the retracted position. You will need to make guarding to protect the
operator from sawdust and touching the chain.
Fig. 3
5