Great Lakes CMRX-45U30 Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Stojaki i stojaki Great Lakes CMRX-45U30. Great Lakes CMRX-45U30 6 stron. Cable management racks
Drukuj stronę2
PREFACE
This manual is provided to prevent service personnel from committing an act that results in the risk
of fire, electric shock, or injury to persons. Only trained service personnel should receive, unpack,
and assemble the racks. In addition, only trained service personnel should install equipment in
enclosures.
SAFETY SYMBOLS USED IN THIS MANUAL
This manual provides general safety guidelines to be observed during installation, operation, and
maintenance of the racks.
WARNING:
Failure to follow directions in the warning could result in injury to persons or loss of life.
BEFORE ASSEMBLY, PLEASE SEE PAGE 9 FOR SAFETY CONSIDERATIONS.
INSTALLATION
RECEIVING, UNPACKING, AND REMOVING THE RACK
Inspect and report damage before receiving. Unpack the rack by carefully removing the corrugated
cartons and corners. Avoid damaging the rack when removing packaging.
SERVICE
The CMR/CMRX Racks should be repaired by personnel trained by Great Lakes, or returned to Great
Lakes for repair or replacement. Contact Great Lakes Technical Support at 814.734.7303 or at
greatcabinets.com
HARDWARE
Racks and accessories ship with hardware to accommodate multiple assembly configurations.
Depending on the configuration you are building, you may have additional hardware.
INSTALLATION QUESTIONS?
Call Technical Support at 1-866-879-4522 or email [email protected]
3