Agrident APR500 Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Systemy RFID Agrident APR500. Agrident APR500 9 stron. Weight from scale
Również dla Agrident APR500: Podręcznik (14 strony)

Drukuj stronę

APR500 Barcode-Version

Safety and Care

The manufacturer accepts no liability for damage resulting from improper use or use not

consistent with that described in these operating instructions.

 The APR500 Reader contains no parts that can be repaired by the user. For this reason the

Reader Electronic may only be repaired by authorized customer service personnel.

 In both operation and storage of the reader please secure to comply with the environment

conditions specified in the technical data.

 Clean the APR500 Reader only with a damp cloth. Use only water and any commercially

available cleaning agent.

Any modification to the APR500 Reader Electronic will render the warranty null and void.

Warranty

The manufacturer of the APR500 Reader Electronic will provide a warranty of

from the day the device is shipped and subject to the following conditions:

1. Without submission of proof of purchase no warranty can be given.

2. In the event that defects are detected the manufacturer is entitled to choose between

up to two attempts at repair or supplying a replacement device on one occasion. The

warranty period for the repaired item or for a replacement item is 3 months but will

always extend to the end of the original warranty period. No further claims can be

entertained, especially claims for compensation for consequential losses. This

exclusion of liability does not apply to claims made on the basis of the Product Liability

Act.

3. Warranty claims cannot be entertained unless the Agrident system was installed

properly and used properly and for the purpose intended.

No warranty obligations exist in particular when:

1. Damage is attributable to improper use of the device, to a incorrect connection or

incorrect operator action;

2. The device was not cared for and maintained in accordance with the manufacturer's

recommendations and this is the cause of the damage;

3. The damage is due to any modification to the device;

The damage is due to force majeure, for example lightning strike;

The damage is due to wear, resulting from overstressing mechanical parts.

09/04/15

12 months

Page 7 of 9