Hi-Force TLE5014 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Walety Hi-Force TLE5014. Hi-Force TLE5014 18 stron.

7.1 Lifting the Toughlift

•

Before lifting the unit, adjust the handle (See figure 5.1) into its forward most locked position (See

figure 7.1). This places the handle directly over the units' centre of gravity, allowing it to be safely

lifted by its handle.

•

Attach the lifting strap to the uppermost horizontal beam of the handle assembly (See figure 7.2).

IMPORTANT

•

If necessary, attach guide wires to help control the movement of the unit during the lift.

•

The ToughLift unit can now be safely lifted.

Figure 7.1: Handle Position for Lifting the Unit

7.2 Transporting the Toughlift

•

Make sure the unit is securely fastened down and cannot shift during transport.

7.0 Lifting and Transport

A lifting strap with a minimum capacity of 1 tonne and appropriately rated shackles

fitted to each end, must be used.

Operating Instruction Manual:

OM-TLE50-01

Figure 7.2: Lifting the Unit

From Serial Number:

All