Active Silicon HARRIER Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt nagrywający Active Silicon HARRIER. Active Silicon HARRIER 15 stron. Usb/hdmi camera interface board
Drukuj stronę
QUICK START GUIDE
HARRIER USB/HDMI
CAMERA INTERFACE BOARD
Introduction
This guide is designed to get you quickly up and running with the
Harrier USB/HDMI Camera Interface Board (AS-CIB-USBHDMI-002-A) and the Harrier USB/HDMI
Evaluation Kit (AS-CIB-USBHDMI-001-EVAL-A). The interface board can be purchased as a pre-
assembled camera module with a range of different cameras, e.g. Tamron MP1110M/MP2030M-GS
or Harrier 36x/10x AF-Zoom Cameras. The board is configured by default for the Tamron MP1110M.
This document should be read in conjunction with the datasheet and other documents available on
Active Silicon's website,
https://www.activesilicon.com/products/harrier-usb-hdmi-camera-interface-board/
Figure 1. Harrier USB/HDMI Interface Board
mounted on a Tamron MP1110M camera
Figure 3. Harrier USB/HDMI Interface Board
mounted on a Harrier 36x AF-Zoom Camera
with global shutter
The Harrier USB/HDMI Camera Interface Board can also be supplied in HDMI- or USB-only variants.
A 3G-SDI/HD-SDI camera interface board is also available. For more details contact Active Silicon.
March 2021
HARRIER USB/HDMI CAMERA INTERFACE BOARD
(see Harrier USB/HDMI Camera Interface Board - Downloads section):
QUICK START GUIDE
Figure 2. Reverse side of Harrier USB/HDMI
Camera Interface Board
Figure 4. Interface board block diagram
showing position of connectors and DIP
switches
Version 1.7 – March 2021
Page 1 of 14