Hi-Force HVL50 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Hi-Force HVL50. Hi-Force HVL50 13 stron. Single-acting, very low height pancake cylinders

Drukuj stronę

5.3 Bleeding Trapped Air from the System

Cylinders and hoses are not always completely filled with oil when new. It is not usually necessary to bleed

air from single-acting cylinders. However, you MUST ensure that all hydraulic hoses are pre-filled with oil

before connection, to ensure no additional air is introduced into the system.

NEVER extend any HVL cylinder unless its base is fully supported and an external load

is present.

The bleeding of trapped air from a hydraulic system must only be performed by

qualified personnel who have been trained and are competent to do so.

Operating Instruction Manual:

OM-HVL-01

Serial Numbers:

From: AF0324