Hi-Force TWM1500 Series Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Narzędzia Hi-Force TWM1500 Series. Hi-Force TWM1500 Series 5 stron.

Drukuj stronę

INACCURATE TORQUE SETTINGS

An out-of-calibration torque wrench can cause

part or tool breakage and inaccurate torque

settings, resulting in SERIOUS INJURY or DEATH.

ALWAYS use only tested and calibrated torque

wrenches, ALWAYS use an approved torque

tester.

EXPLOSION AND FIRE HAZARD

Sparks can occur when using the torque

wrench, which can cause an explosion or a fire

and can cause SERIOUS INJURY or DEATH.

NEVER use the torque wrench in areas where

sparks can cause explosions or fires.

TEMPERATURE WARNINGS

When the torque wrench is exposed to

temperatures below 64°F and above 82°F, or

high levels of humidity (above 90%), it may

cause inaccurate torque settings.

ALWAYS check the torque wrench with an

approved torque tester before and during use

in these conditions.

The torque wrench is designed to tighten bolts

and nuts to a specific tightening or torque

specification.

 DO NOT use the torque wrench for

any other purpose.

 MISUSE can lead to SERIOUS INJURY or

DEATH.

 DO NOT allow children to use the

torque wrench.

NEVER use non-standard extension end fittings

with a torque wrench with a built-in ratchet or

ratchet adaptor.

Take the following safety precautions to

prevent injuries and damage caused by

improper handling and unsafe use of the

torque wrench:

 NEVER use the torque wrench for

loosening bolts and nuts.

 NEVER use a damaged torque

wrench.

 NEVER modify any parts of the torque

wrench or accessory parts.

 NEVER use a torque wrench or an

accessory part that has been

modified.

 ALWAYS inspect the torque wrench,

especially the square drive and the

housing, for damage before use.

 ALWAYS release the torque wrench

IMMEDIATELY after you hear the click

indicating that you have reached the

desired torque setting.

Hi-Force Limited – Prospect Way – Daventry – Northants NN11 8PL – United Kingdom

Tel: +44(0) 1327 301000: Fax: +44(0) 1327 706555: Website: www.hi-force.com

INSTRUCTION MANUAL:

Model Series: TWM1000, TWM1500, TWM2000

 ALWAYS use the torque wrench ONLY

in the direction of rotation indicated

on the housing.

 ALWAYS use only original accessory

parts or parts approved by the

manufacturer.

 ALWAYS reset the torque wrench to

the lowest setting after each use or at

the end of the workday.

 ALWAYS hold the torque wrench in the

center of the handle when using the

tool accessories.

 ALWAYS transport the torque wrench

in the shockproof packaging material.

Product Description

A: Hexagon Key B: End of the handle C: Scale

window F: Square drive G: Stop mark on

extension piece H: Torque wrench

I: Extension piece.

Using the Torque Wrench

ALWAYS read the Important Safety Information

(Section 1) BEFORE using the torque wrench.

These instructions describe the use of the

following product types:

 Torque wrenches with aluminum alloy

housing

 Torque wrench with plastic housing

ALWAYS use the torque wrench ONLY in the

direction of rotation indicated on the housing.

The specified direction of rotation is visibly

marked on the housing

Right-Handed and Left-Handed Tightening:

 Single square drive for right-handed

tightening:

 Double square drive for right- and left-

handed tightening*: