Great Lakes GL840N12-3042-SS Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Obudowa Great Lakes GL840N12-3042-SS. Great Lakes GL840N12-3042-SS 16 stron. Nema enclosures
Drukuj stronęPREFACE
This manual is provided to prevent service personnel from committing
an act that results in the risk of fire, electric shock, or injury to persons.
Only trained service personnel should receive, unpack, and assemble
the NEMA Enclosures. In addition, only trained service personnel should
install equipment in enclosures.
SAFETY SYMBOLS USED IN THIS MANUAL
This manual provides general safety guidelines to be observed during
installation, operation, and maintenance of the NEMA Enclosure.
WARNING: Failure to follow directions in the warning could result in
injury to persons or loss of life.
SAFETY CONSIDERATIONS
WARNING: Improper handling and use of the NEMA Enclosure could
result in equipment damage, serious injury, or possible death.
Only trained service personnel should be used to remove the enclosure
from the pallet. Also, be sure you have a sufficient number of service
personnel. Do not attempt to move enclosures by yourself.
Be sure to read and follow all individual manufacturer equipment
manuals for safety and installation instructions.
Proper spacing is required when installing electrical equipment to avoid
electrical shock. Maintain minimum spacing between the accessories
and components and the computer enclosure assembly for safe
operation of the equipment when installed in accordance with the
National Electric Code ANSI/NFPA 70-1999.
The ambient temperature operating range for the NEMA Enclosure and
accessories is +50 to +95° F (+10 to +35° C).
The non-operating temperature is -4 to +140° F (-20 to +60° C).
SERVICE
The NEMA Enclosures should be repaired by personnel trained by
Great Lakes, or returned to Great Lakes for repair or replacement.
Contact Great Lakes Technical Support at 814.734.7303 or at
greatcabinets.com
2