Daxten SCOUTUTP - Instrukcja instalacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przełącznik Daxten SCOUTUTP -. Daxten SCOUTUTP - 17 stron. Multi-platform kvm switch
Również dla Daxten SCOUTUTP -: Broszura (2 strony)

Drukuj stronę
Resetting the Switch or ADAPTOR units
To reset the Switch or ADAPTOR units:
1.
For the Switch, check the SCOUTutp Switch option in the Switch Unit box.
2.
For the Adaptors, check one or more Adaptors in the ADAPTOR Units box.
3.
From the Options menu choose Advanced / Reset. The units reset. The system should now
be operational.
Troubleshooting tips
When using Firmware Update software you may sometimes get a Communication Error message.
When updating a unit and a Communication Error message appears, do the following:
1.
Check that the Serial download cable's connector is connected to the Switch's
Communication port.
2.
Check that the Serial download cable's DB9F connector is connected to the DB9M Serial
port on the CPU's rear panel.
3.
Restart the download process.

Power failure

If the power fails while updating the SCOUTutp firmware, do the following:
If the power fails during the firmware update of the Switch, a Communication Error message appears.
Simply resume the firmware update by opening the folder that contains the firmware update file and
continue from there.
If the electricity fails during the firmware update of the cables a Not Responding or Upgrade Error
message appears. Restart the upgrade from the beginning.

USB / SUN Combo keys

The connected PS/2 keyboard does not have a special SUN keypad to perform special functions in
the SUN Operating System environment. So when a USB or SUN ADAPTOR is connected to a SUN
computer, the ADAPTOR emulates these SUN keys using a set of key combinations called Combo
keys. See the table below.
SUN key
Combo key
Stop
Left Ctrl + Alt + F1
Props
Left Ctrl + Alt + F3
Front
Left Ctrl + Alt + F5
Open
Left Ctrl + Alt + F7
Find
Left Ctrl + Alt + F9
Again
Left Ctrl + Alt + F2
Undo
Left Ctrl + Alt + F4
Copy
Left Ctrl + Alt + F6
Paste
Left Ctrl + Alt + F8
Cut
Left Ctrl + Alt + F10
USB / Mac Settings (On the USB ADAPTOR)
To access any of the following Special Settings:
1.
Install the USB ADAPTOR.
2.
Attach a PS/2 keyboard to Manager Unit or to Switch Unit
3.
Open a text-editing program (like Notepad or SimpleText)
4.
Hold down the Esc key, tap the S key, and release the Esc key.
5.
The USB-to-PS/2 conversion chip version and settings will be displayed: "v2.1[wp]" means
you have version 2.1 and the "W" and "P" settings are active.
6.
Using Esc and the appropriate letter, you may change settings as desired and the new
configuration will be displayed in the text editor.
SUN key
Help
Left Ctrl + Alt + F11
Compose
Left Ctrl + Alt + Keypad *
Crescent
Scroll Lock
Volume Up
Left Ctrl + Alt + Keypad –
Volume Down
Left Ctrl + Alt + Keypad +
Mute
Left Ctrl + Alt + F12
Sun Left ◊ key
Left
Sun Right ◊ key
Right
Alt-Graph
Right Alt or Alt Gr
Stop A
Left Ctrl + Alt +1
Combo key
key
key