Gaggenau VI 421 Instrukcja obsługi i montażu - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi i montażu dla Płyta grzewcza Gaggenau VI 421. Gaggenau VI 421 18 stron. Induction cooktop

Preparing the cabinet

• Cut out the recess for the hob in your worktop.

Proceed as indicated on the installation sketch.

The installation sketch contains the measurements

of the space required for the trim between the

appliances. Several appliances can also be

installed in individual recesses, as long as a

minimum clearance of 50 mm is kept to between

the appliances.

• As shown in the installation sketch, drill the

Ø 35 mm holes to secure the control knobs in the

cabinet front.

• If the cabinet front is thicker than 26 mm, the front

must be routed from the back to max. 26 mm on

an area of 80 x 310 mm.

min. 5

80 x

310

D = 26

D > 26

• It is possible to install the appliance above a

ventilated built-in oven. Observe the installation

instructions. Remove the rear wall of the kitchen

cabinet to ensure air circulation of the appliance.

Leave a ventilation gap of 20 mm behind the oven

or the kitchen cabinet and the wall.

min. 5