Hi-Link HLK-B30 Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Moduły bezprzewodowe Hi-Link HLK-B30. Hi-Link HLK-B30 14 stron. 802.11n+ble 4.2 wireless module
Drukuj stronę
After the distribution network is successfully connected, the app will automatically enter the control
interface directly:
4.4. Using the Tmall Elf distribution network
Before using the Tmall Elf to configure the network, you need to let the module enter the distribution
mode, then say "Tmall Elf, find device" to the Tmall Wizard, and then follow the prompts of the Tmall
Wizard to configure the device to the same router.
When the device is successfully connected, you can say "Tmall Elf, Turn On the Light" or "Tmall Elf,
Turn Off the Light" to the Tmall Elf to turn on or off the LED_Y light of the device.
5. Reflow soldering temperature curve
When the module is over-fired, please strictly follow this temperature curve. If the temperature deviation of the reflow
soldering is too large, the module will be damaged!
Temperature setting (degrees Celsius)
Warm zone
1
Upper
temperature
125
zone
Lower
temperature
125
zone
Conveyor speed: 70.0 cm/min
HLK-B30
Shenzhen Hi-Link Electronic Co., Ltd.
HLK-B30 Distribution network completed
Figure 6
2
3
4
135
155
185
135
155
185
5
6
195
225
240
195
225
240
7
8
230
230
Manual
8/10