7-BIT Sum Series Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Adapter 7-BIT Sum Series. 7-BIT Sum Series 14 stron.

Configuration mode

In order to activate configuration mode one should first run any text editor. Then R-Shift + Pause key combination should be pressed

(when using a Mac keyboard equivalent R-Shift + F19 applies). If configuration mode is successfully enabled, the appropriate text message

appears.

This is the list of available key assignments:



F1 – reset type - software (A2000,A3000,A4000,CD32,CDTV) or hardware (A600,A1200),



F2 – R-Amiga to R-Alt remapping,



F10 – displaying key codes (on/off),



F12 – displaying the configuration.

Disabling configuration mode can be achieved by additional pressing of R-Shift + Pause key combination (R-Shift + F19 for Mac keyboards).

Appropriate text message confirms it.

WARNING!!!

If resetting your Amiga does not seem to have any effect – please check the reset type setting (F1 key).

Sum