Hi-ltte RAMBO330 3in1 Series Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprawa oświetleniowa Hi-ltte RAMBO330 3in1 Series. Hi-ltte RAMBO330 3in1 Series 9 stron. 330w 3in1 beam-spot wash

Drukuj stronę

FAILURE SCOREBOARD AND SOLUTIONS

Listed below is a common approach in the operation of a

few common problems.

◇Fault A: The lamp is not working, the bulb is not lit, the

fan does not work

Solving 1: Check the power supply or the fuse is burned

Solve 2: The main power connector on the voltage detector

◇Fault B: connect control units, lighting does not respond

Solving 1: After connecting control units, lighting should be

working. If it is not working properly, check the signal cable

plugs and wires are connected correctly.

Solve 2: If the lamp is lit display, but the channel does not

respond, check the address code is set correctly and DMX

output voltage polarity.

Solve 3: DMX signal problems if your lighting is off,

check the input terminal and the circuit board

Solve 4: Please change another one DMX controller

Solve 5: Check whether the signal cable near high voltage

power lines caused DMX display board inside the wire

damage.

◇Fault C: some channel is not working

Solving 1: stepper motor may be damaged,

or the line connecting the motherboard burned out

Solve 2: IC driver board on the motherboard may be

damaged

CLEAN LIGHTS

Must regularly clean the outside of the

optical lens focusing the dust。

Based on the number of lamps use a

clean environment to determine:

Are moist, smoked or the surrounding

environment is particularly dirty, which

can cause dust deposition lamps.

Please use a glass cleaning solution and

a soft cloth to wipe the focusing

optical lens. Carefully Qi dry each

part. At least 20 days to clean the

dust outside a lens, the lens inside

30-60 days to clean up the dust once.

Regular inspection lamp fan and bottom case fan, a fan of at least

20\days to clean up dust deposition. Above cleaning must be

executed in case of power failure.

330W moving head beam light shine table

PHOTOMETRICS DIAGRAM 2

PHOTOMETRICS DIAGRAM 38

600000

330000

240000

150000

90000

22000

11000

7400

5100

3000

0.23

0.31

0.39

0.47

0.59

1.22

1.7

2.16

2.72

3.36

deaner