Gaggenau AH 790 Instrukcja obsługi i montażu - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi i montażu dla Okap wentylacyjny Gaggenau AH 790. Gaggenau AH 790 20 stron. Extractor hood

4. Cleaning and care

Fig. 13

Note:

The handles of the grease filters must be visible

after installation. They can no longer be removed

if the handles are in the inner part of the housing.

Cleaning the grease filters:

The

(Grease filter saturation) symbol flashes

on the display after an operating time of 30 hours.

Flashing of this symbol signals to you that the

grease filters have to be cleaned. The grease filters

can be cleaned at any time, even if the

filter saturation) symbol does not flash. The metal

filters can be removed easily for cleaning.

Proceed as follows:

– Grip the grease filter handles and press the

slide towards the rear.

– Pull the grease filter out of its mount in the

downward direction (Fig. 13).

– Repeat the operation with the other grease

filters.

You can clean the metal grease filters in a dish-

washer at a maximum temperature of 65 °C / 150 °F .

Place the grease filters vertically in the dishwasher

to ensure that no food remainders will stay on them.

Slight discoloration can occur when cleaning the

grease filters in a dishwasher.

When replacing the grease filters, wipe out

the inner part of the housing with hot detergent

solution.

Reinsert the grease filters in the hood after

cleaning. Install them in the reverse order to

removal.

Press the

(Grease filter) key to set the elapsed

hours counter to zero; the

stops flashing.

Do not clean the appliance with a steam cleaning

apparatus or with water pressure because this

poses a risk of short-circuits.

(grease

(Grease filter) symbol