Great Little Trading Little Wren Cot Top Changer L5119 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Meble dla niemowląt i małych dzieci Great Little Trading Little Wren Cot Top Changer L5119. Great Little Trading Little Wren Cot Top Changer L5119 7 stron.

Drukuj stronę
Component Check List
A
2x Side Panels
C
1x Base Panel
E
1x Right Side Panel

Hardware Check List

#1
16x Cam Dowels
#3
8x Wooden Dowels
#5
3x Wood Screws
(25mm)
#7
2x Protective Strips
(160mm)
#9
2x Flat Washers
(10mm)
B
1x Divider Panel
D
1x Left Side Panel
#2
16x Cam Locks
#4
2x Wood Screws
(10mm)
#6
2x Safety Straps
#8
2x Protective Strips
(80mm)
You will need (not supplied)
1x Philips Screwdriver
A
#1
#2
#3
#1
#2
#2
When inserting into the panel, ensure that each cam
lock's arrow is pointing towards the drill hole on
the side edge of the panel & the dowel that it will
be receiving. When the panels are in the connected
position, using a screwdriver, turn the cam lock in a
STEP 1:
Working on a protective surface like a carpet or a rug, take one side panel (A) and
insert 2x cam dowels (#1) into the outer holes along the edge of the panel using a
Phillips screwdriver.
Insert 1x wooden dowel (#3) into the inner hole between each cam dowel.
Orientate base panel (C) so that all the drill holes are facing outwards as shown
(important!) and join with one side panel (A) on the end that has 2 large drill holes
on the shorter edge.
To secure the panel in position, insert 2x cam locks (#2) into the large drill holes on
base panel (C) and turn them clockwise to lock as shown.
3
Hardware for Step 1:
2x #1 Cam Dowels
2x #2 Cam Locks
1x #3 Wooden Dowels
C
Using Cam Locks:
clockwise direction to lock and secure.