Active Tools 2k rowing shoe Instrukcja instalacji, użytkowania i pielęgnacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji, użytkowania i pielęgnacji dla Akcesoria Active Tools 2k rowing shoe. Active Tools 2k rowing shoe 2 stron. Adjustable length

Drukuj stronę

The yellow and black heel restraints must now be fitted.

It is extremely important that this is done carefully as properly fitted heel restraints are vital in the event of a capsize.

a) Your shoes come with two sets of ties so that you have a spare set when the originals need replacing. These are high

quality ties (rock climbing accessory cord) however they can still eventually fray. It is therefore essential to check them

every few weeks.

b) The ties should be fitted so that the heels can only rise by an absolute maximum of 3 inches/75mm and preferably by

2 inches/50mm.

c) We recommend you use the Overhand Knot shown, as it is simple and reliable. Then make sure you pull it tight.

To attach the Quick Release link you need to thread the grey lanyard through the round holes in the ends of both main

straps and then back through the rubber Puller. Finally, tie the ends of the lanyard together and pull the knot back into the

hole through the Puller so that it is hidden.

IN USE

You must adjust the shoes to your shoe size before use as the adjustment mechanism is locked when your feet are in

them.

The toe straps should be adjusted tightly enough that your feet do not move around but not so tightly that they become

uncomfortable over time. These are like erg foot straps, so you willl need to wiggle them as you pull them.

For maximum comfort, the main straps should only be wrapped down the sides of the shoes, not pulled tight.

The shoes should be washed regularly using warm soapy water and then rinsed to keep them clean and hygienic.

Above 70°C/160°F the foam mouldings will shrink. This temperature won't be seen in normal use but can occur inside

vehicles on hot sunny days.

MAINTENANCE

After a period of time the Velcro on the straps will inevitably degrade. The straps can easily be changed but the

replacements are only supplied as a set.

Please note that the straps should be replaced only once as by the time two sets of straps have worn out the structure of

the shoes may have begun to weaken and they should be replaced.

SAFETY

Heel restraints are vital to your safety and it is therefore extremely important that they are fitted and adjusted

properly. They should also be checked every few weeks and replaced if there is any sign of fraying.

A spare set of heel restraints is supplied with the shoes and further sets can be purchased from the Active Tools website.

www.active-tools.com

pull

fb.me/ActiveTools

pull

@Active_Tools