Gaggenau CE291 Series Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Hob Gaggenau CE291 Series. Gaggenau CE291 Series 16 stron. Glass
Również dla Gaggenau CE291 Series: Instrukcja obsługi (16 strony)
Drukuj stronę
Within the next 10 seconds set the required cooking
2.
time on the control panel.
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate
switches off. A signal sounds and
display for 10 seconds. The
brightly.
Changing or cancelling the cooking time
Select the hotplate.
1.
Touch
.
2.
a The
display lights up brightly.
On the control panel change the cooking time or set
3.
it to .
Switching off the continuous signal
You can switch the signal off manually.
Touch any symbol.
▶
a The displays will go out and the audible signal will
stop.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
10 Safety switch-off
If you do not change the settings of a hotplate for a
long time, safety switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The hotplate stops heating.
dicator / flash alternately on the hotplate display.
11 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
flashes on the
display lights up
and the residual heat in-
Switch on the automatic timer in the basic settings.
→ Page 12
Tip: The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates. → Page 10
9.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
Switch on the kitchen timer.
1.
There are 2 different ways of switching the kitchen
timer on.
If a hotplate has been
selected.
If a hotplate has not
been selected.
a The
indicator lights up.
Within the next 10 seconds set the required time on
2.
the control panel.
a The time counts down.
a When the time has elapsed, a signal sounds.
lights up on the timer display. The
the kitchen timer lights up brightly. It switches off
after 10 seconds.
Displaying the time
Select the kitchen timer with
▶
a The time is displayed for 10 seconds.
Setting the correct time
Select the kitchen timer with
1.
Set the required time on the control panel.
2.
10.1 Overriding safety switch-off
Touch any control.
1.
a The display goes out.
Reset.
2.
11.1 Activating wipe protection
Touch
.
▶
a A signal will sound.
a The indicator lamp above
a The control panel is locked for 30 seconds.
Safety switch-off en
Touch
twice within
10 seconds.
Touch
.
indicator for
.
.
lights up.
11