Hi-Tech ZycoTherm Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pompa wodna Hi-Tech ZycoTherm. Hi-Tech ZycoTherm 12 stron.

Page 1

In-Line Blend Pump

Install & User Manual

Plan a suitable location for the pump and the ZycoTherm material tote. The In-Line Blend Pump should

be located within 15 feet of the injection site, the closer the better. Typical injection location of

material is in the AC strainer before the AC Pump. Because this is the suction side of the system this

alleviates any potential back pressures into the Blend Pump and causes the greatest amount of mix

time to properly blend into the AC. The separate control box should be placed inside the control

house.

The Blend Pump requires 120VAC on a 20amp circuit. It is recommended to hard wire the pump. In

addition to power, the pump also requires a cable run from the Control House to the pump location.

This cable is for communication, and CAT5 Ethernet cable is typical because it is easy to find. CAT5

cable not supplied with pump.