Hi-Tech GSM+PSTN Touch Screen Wireless Alarm System Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System bezpieczeństwa Hi-Tech GSM+PSTN Touch Screen Wireless Alarm System. Hi-Tech GSM+PSTN Touch Screen Wireless Alarm System 13 stron.

Drukuj stronę

Here need to setup only based on linking network. Operations: ENT + press "

ENT】 → "X X X X": 4 digits, you can set 0000~9999. Default set before shipping is at ransom.

【Upload status】：

This is for uploading Arm/Disarm/Alarm information to the Managing Centre. Operations:【ENT + "▲▼" + ENT】 → "▲▼"

choose "yes" or "no" for upload or not upload. The defaulted is "No".

【CutWire Alarm】：

This is for PSTN (landline) only. ENT + CutWire Alarm, press "▲▼" to choose YES or NO. If choose "Yes",it will alarm when

telephone line is not connected. Default set before shipping is "Yes".

【Zone Attribute】：

Here is for setting【Zone number】,【Zone type】, 【Alarm Type】【Bypass Zone】 &【Entry Delay Set?】.

---【Zone number】：

Here has 39 zonesfor your settings. 2 dedicated zones for remotes(Supports up to 4 remotes or wireless keypads per zone).29

wireless zones(Each zone supports up to 4 sensors) and 8 optional wired zones. Each zone needs to setup "Zone Type", "Alarm

Type" ,"Bypass Zone" & "Entry Delay".

Table 3: "Zones Number" setting

Zone

Sensor Type

Number

00、01

02 ~ 10

Wireless sensors

11 ~ 20

21 ~ 30

31 ~ 38

Wired sensor

【Zone Type】：

You can see "2", "1", "0".( "2" mean motion zone, "1" means perimeter zone, "0" means emergency zone)

Press "▲▼" to choose the one you desire to setup, then press ENT to confirm your settings.

【Alarm Type】：

【ENT + Alarm Type+ press "

below table. )

Table 4: Wireless/wired sensor code

Code

Sensor

Button0

Name

Code

Sensor

Name

Table 5: Default set before shipment

Wireless sensors

Zone Number

【Bypass Zone】：

This setting is for make zones enable or disable. Here has "Yes" & "No" for your alternatives. "Yes" means make this zone‟s

sensors silent, "No" means keep this zone‟s sensors working. Press "▲▼" to choose "Yes" or "No", then press ENT to confirm

your settings.

【Entry Delay Set?】：

Zone

Type

——

Emergency zone

Perimeter zone

Motion zone

——

" button to delete old record + X X + ENT】→ "X X": 2 digits. Alarm type code. 2 digits.( See

Button1

Gas

Perimeter

Wireless

Wireless door

remote

sensor

Applicable sensor names

Wireless remote & Wireless Keypad

Wireless Smoke Alarm,

Wireless Gas Alarm& Panic button etc.

Wireless Door/Window Sensor &

Wireless Curtain PIR etc.

Wireless Wide-Angle PIR Motion Sensor etc.

31,32,33 are Perimeter zone

34,35 are Motion zone

36,37,38 are Emergency zone

Smoke

Door

Window

Motion

Sensor

Wireless

wide-angle

PIR sensor

" button to delete old record + X X X X +

Each zone

support up to 4

sensors

See Table 4:

Wireless/wired

sensor code

Glass

Motion

Sensor

(doorbell)

Wireless gas

Wireless

sensor

smoke sensor

Notes