Hi-Tech Diamond All-U-Need Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sander Hi-Tech Diamond All-U-Need. Hi-Tech Diamond All-U-Need 16 stron.

Optional Cup Holder Instructions

We are always trying to make our products better for our customers. A new, helpful addition to the

All-U-Need is the All-U-Need Cup Holder. Instead of a loose, tilted cup that isn't held up by anything but

the drain tube, we have added a cup holder to your All-U-Need to secure the cup. For a visual, the

pictures below are the before and after images:

Without Cup Holder

Since this is an optional addition, you will have to install it yourself. Follow these three simple

instructions to install your new cup holder:

You will find the black cup holder in your water kit bag, take it out.

Take a screwdriver and unscrew the screw that comes in your All-U-Need base. You will find the

screw in your All-U-Need base in the front right corner.

Center the hole in the black cup holder with the hole in the base and screw the black cup holder into

the All-U-Need base.

IMPORTANT NOTE:

the screw will not be able to tighten. Only tighten the screw so there is a snug fit.

Do not over-tighten the screw or the screw may strip the hole. If this happens,

With Cup Holder