Ceia PD240CH Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wykrywacz metali Ceia PD240CH. Ceia PD240CH 20 stron.

Use

2.6

Operational verification

The calibration test pieces included in the

set allows the operator to perform a quick

check of the detection capability and

discrimination, using the Detection Test

Piece (code 72131) and the Discrimination Test

Piece (code72132).

Procedure

Verification with "HEAD" analysis mode



Verification with "BODY" analysis mode



Verification with "ALL-METALS" analysis mode



2.7

The Hand Held Metal Detector can be used close to a Walk-Through Metal Detector at the

distance usually kept for secondary inspections.

Select "HEAD" analysis mode and pass the Detection Test Piece close to the bottom

side of the detector with the "HEAD" side facing it. The test piece must pass over the

centerpoint of the sensing area. An alarm signal must be provided.

Pass the Discrimination Test Piece as above while keeping it aligned to the detector.

No alarm signal must be provided.

Head

Select "BODY" analysis mode and pass the Detection Test Piece close to the bottom

side of the detector with the "BODY" side facing it. The test piece must pass over the

centerpoint of the sensing area. An alarm signal must be provided.

Pass the Discrimination Test Piece as above while keeping it aligned to the detector.

No alarm signal must be provided.

Body

Select "ALL-METALS" analysis mode and pass the Detection Test Piece close to the

bottom side of the detector with the "HEAD" side facing it. The test piece must pass

over the centerpoint of the sensing area. An alarm signal must be provided.

Pass the Discrimination Test Piece as above while keeping it aligned to the detector.

An alarm signal must be provided.

Head

FI100K0025v1100 UK - - PD240CH

Body

Head

Body