Agrify PRECISION HDU Podręcznik operacyjny - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik operacyjny dla Systemy filtracji wody Agrify PRECISION HDU. Agrify PRECISION HDU 12 stron. Hydrocarbon distillation unit
Drukuj stronęSection 2 – Getting Started
Review the following system installation and operation requirements information before preparing for operation. Failure to do so may result in
improper/unsafe installation and/or dangerous operating conditions.
2.1.
System Placement
2.1.1.
The HDU shall be placed on a level surface in a properly ventilated area that has been approved by your AHJ (Authority
Having Jurisdiction).
2.2.
Mounting of Components
NOTE:
Process in/out hoses should be supplied by Precision. The hose and fitting set will be tailored to the end user's extraction system.
Precision Extraction is not responsible for poor performance of the system due to improper hosing.
2.2.1.
Securely mount all vessels to the mounting rack.
2.2.2.
Ensure all lock pins are in place for tanks.
2.2.3.
Level all components.
2.2.4.
Lock all castors on the mounting rack.
2.3.
TCU Options
NOTE:
Any TCU that is used in conjunction with the HDU must be NRTL listed and cannot use flammable chilling/heating media.
2.3.1.
For hazardous environments (Class I, Division 1 and Class I, Division 2 locations) both a liquid heat source and a cooling
source need to be plumbed into the hazardous area.
2.3.2.
Confirm with Precision Extraction all TCU options that are present on site at the client facility, so a suitable option is
used. A suitable TCU may also be sourced through Precision Extraction.
2.4.
Solvent Requirements
2.4.1.
Use only approved solvents. Approved solvents are displayed in the following table. Never mix solvents other than what
is stated below. Thoroughly clean the system before changing solvents.
Approved Solvent(s)
Butane
Isobutane
Propane
Propane/Butane Blend
Model HDU Operational Manual – For Hazardous Environments
Precision® Extraction Solutions
©2022 PX2 Holdings, LLC. All rights reserved. Rev. 04/24/23
Model HDU Operational Manual – For Hazardous Environments
Operating Process
Flow
Compressed N2 Gas
6