ADEMCO 6137 Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa ADEMCO 6137. ADEMCO 6137 2 stron. Remote keypads
Również dla ADEMCO 6137: Podręcznik użytkownika (9 strony), Instrukcja instalacji (2 strony), Skrócona instrukcja obsługi (3 strony), Instrukcja instalacji (2 strony)

Drukuj stronę

KEYPAD FEATURES

Backlit Display

Dedicated Panic Keys

Flush Mount Option

All the above keypads have backlit keys, are keypad addressable, have a Red "ARMED" indicator and a Green "READY" indicator.

ADEMCO CONTROLS

VIA16*

VIA30P † *

VISTA 10 † */VISTA 20 † *

4120XM † *

†

4140XMP */VISTA 40

†

Vista-50

**/Vista-50 UL

†

5110XM

*/5120XM

†

5140XM

**/VISTA-100

†

A 2-Line alpha-numeric display keypad must be used to program these controls.

Use non-addressable mode with this controls (set to address 31)

Use addressable mode (addresses 00–30).

***

Console color subject to approval of local authority having jurisdiction.

Note:

Permanent display backlighting is an option on some controls - see the control's instructions.

_____________________________________________________________________________________________________________________

GENERAL INFORMATION

The 6128, 6137, 6137R, 6138, 6139, 6139R, and 6139AV Remote

Keypads are keypad addressable (no DIP switches) and are intended

for use with the controls listed in the table above. They can be set

for the non-addressable operation (address 31) if required by the

control with which they are used.

NOTE: The 6137R and 6139R have red bezels instead of gray.

Otherwise, they are exactly the same as the 6137 and 6139,

respectively.

The display on a Fixed-Word Keypad provides 2-digit numerics for

zone identification and a set of pre-designated English language

prompts (e.g.,"ALARM," "AWAY," "STAY," "CHECK," etc.) for

indicating the system's status.

A 2-line Alpha Keypad is equipped with a programmable 2-line, 32

character (16 character per line) English language display for

complete zone identification (if descriptors are programmed), plus

system status. The 6139AV is an alpha keypad with a built in

speaker and microphone to be used with a VIM (2-Way Voice)

module.

6138, One-Line Display Keypad: Some controls (e.g. Via30P,

VISTA10, VISTA20) send two 1-line displays of information to the

6138 keypad. To display the second line of information, press the [#]

key. Press the [#] key again to return to the first line of information.

The display automatically returns to the first line of information if

no key is pressed for 3 seconds.

NOTE: After pressing the [#] key to view the second line or

return to the first line, wait at least 3 seconds before entering

a control panel command (e.g., arm the system).

The keys on the keypads are located behind a decorative door, and

are continuously backlit for convenience.

decorative door has space for a zone ID label (supplied) on which the

installer can write descriptions of each zone for handy user

reference.

All keypads allow Panic Alarm activation (if enabled in control

programming). For the 6128, panic alarms are activated by pressing

key pairs 1 & *, * & #, and 3 & #. The 6137/6137R, 6138,

6139/6139R, and 6139AV are equipped with dedicated single keys

for panic activation — keys A, B, and C (the D key is not used as

panic), which are equivalent to the 1 & *, * & #, and 3 & # keys,

respectively.

Single panic keys (A, B, and C) must be held down for at least

2 seconds to activate an alarm.

www.PDF-Zoo.com

INSTALLATION GUIDE

6128

Fixed-Word

Keypad

Yes

The inside of the

firealarmresources.com

6128, 6137, 6137R, 6138, 6139, & 6139R 6139AV

(These Keypads Do Not Use DIP Switches)

6137/6137R

6138

Fixed-Word

1-Line Alpha

Keypad

Yes (see Note

Below)

Yes

Yes, 6137

Yes

Yes, 6137

Yes

Yes,6137

Yes, 6137

Yes, 6137 or

6137R***

A set of adhesive backed labels with some typical "panic" symbols

(i.e., fire, police, personal emergency, etc.) is provided which can be

placed on or next to these keys to identify each key's function for the

end user (as determined by the control panel's capability and

programming, see the control's instructions).

NOTE: That the function of the green "READY' LED (system

ready) differs from the function of the green LED on

Ademco's 4137AD, 5137AD and 6127 keypads.

WIRING AND INSTALLATION

The keypads can be surface mounted directly to a drywall, or to a

single or double gang electrical box. For flush mounting the 6138

and 6139/6139R to drywall, use the optional 6139TRK flush mount

kit (6128 & 6137/6137R /6139AVcannot be flush mounted).

1. Remove the case back by pushing down two "snaps". See

diagram below.

2. Route wiring from the control panel through the opening in the

case back.

3. Mount the case back to a wall or electrical box.

4. Plug the supplied flying lead connector into the keypad PC

board and splice the panel wiring to it. Wire keypads and

functions are described in the SPECIFICATIONS section.

5. Re-attach the keypad to its case back.

6. Remove the clear protective films from the LCD display and

keypad labels.

ARMED

READY

LOCATION OF DEDICATED

PANIC KEYS. "D" KEY NOT

USED FOR PANIC FUNCTIONS.

REMOTE KEYPADS

6139/6139R

2-Line Alpha

Keypad

Yes (see Note

below)

Yes

Yes, 6139

Yes, 6139 or

6139R***

Yes, 6139 or

6139R***

Remove case back by

pushing down 2 "snaps"

along the keypad's top

edge and pulling the case

apart.

OFF

AWAY

STAY

MAX

TEST

BYPASS

INSTANT CODE

CHIME

READY

PANIC

"D" KEY USED FOR SETTING

KEYPAD "TALK AND "VOX"

AUDIO LEVELS ON 6139AV.

N6752V6 6/97

6139AV

Voice 2 Line

Alpha

Yes