GREAT PLAINS Nutri-Pro NP1340AA Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt rolniczy GREAT PLAINS Nutri-Pro NP1340AA. GREAT PLAINS Nutri-Pro NP1340AA 10 stron. Tire scraper
Drukuj stronęNutri-Pro Tire Scraper
3 Heavy Gauge Wheel
These instructions are for installing the tire scraper
to a heavy gauge wheel.
If your gauge wheel does not have the two
mounting holes (1), follow the instructions at
step 3a to install the tire scraper to the gauge
wheel arm.
If your gauge wheel does have the two mounting
holes, go to step 3b for instructions to bolt the
tire scraper to the gauge wheel arm.
3a. Installing to Heavy Gauge Wheel Arm
without Mounting Holes
Position the locator mount (25) over the axle lock
plate (2) and align edges as shown.
2
8
1
25
Position the mount plate (23) on the locator mount as
shown.
Fire Hazard:
Welding can create sparks. Perform the work away from
flammable materials. Wear suitable protective equipment.
Allow hot parts to cool before continuing work.
Tack weld along the top of the mount plate to hold it
in position.
Remove the locator mount.
1
Weld (
places on the top of the mount plate and two places
on the bottom.
Clean off any slag and weld splatter. Allow the welds
to cool. Paint green.
68233
68234C
23
/
inch fillet weld, about 1
4
Great Plains | 427-051M
68235C
1
/
inch long) at two
2
68236C