7AMEnfant VELVETPOD Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Nosidełko dla dziecka 7AMEnfant VELVETPOD. 7AMEnfant VELVETPOD 2 stron.

Drukuj stronę
FRONT
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
HOW TO ONLY USE FRONT PANEL COVER
On Stroller
On Car Seat
WARNING:
Never leave child unattended in this product. Make sure that the child's face is not covered by any part of this product. Child should never be placed face-down in
this product. Do not use this product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use
care when using zippers to avoid injury to the child. Failure to follow any warning may result in death or serious injury to the child. 7AM does not hold itself liable for any injury.
User Manual
VELVETPOD
HOOK & LOOP
CLOSURE
SOFT MICRO-FLEECE
LINING
FLUFFY CUSHY FLAP
BREATHABLE WATER
REPELLANT SHELL
ZIPPERED POCKET
PANEL COVER ONLY
Place the VelvetPOD onto the
1
3
stroller.
Optional: Slip the pouch located
2
behind the hood over the top of the
stroller to secure the VelvetPOD's
4
stability.
1
1
Seat your child in the stroller or car
seat and fasten the safety harness as
per their manufacturer's instructions.
Unzip the front panel cover. Save the
2
VelvetPOD's back for later use.
Slip the front panel's inner bottom
3
pouch over the bottom of the stroller
or car seat to secure the cover.
The VelvetPOD is machine washable. The care label
is located on the back side of the product.
Use the hook & loop straps located
5
Pull the stroller's 5-point harness
on the sides of the VelvetPOD to
through the opening slits located on
attach to the stroller's back or
the back of the VelvetPOD by choosing
sidebars in order to secure it.
the height of the slits corresponding
to your child's size.
Unzip the VelvetPOD cover.
Seat your child on the VelvetPOD in the
6
stroller and fasten the safety harness
as per manufacturer's instructions.
Detach the removable back panel to
2
Place the VelvetPOD onto the car
reveal the large back opening and to
seat and unzip the front panel to
eliminate material between your
open the VelvetPOD.
baby's back and the car seat. Store it
Pull the car seat's 5-point harness
3
for stroller use.
through the large back opening.
Pull the elastic drawstring under the
4
pouch to adjust tightness.
2
1
REMOVABLE
PANEL
4
3
5
BACK
HOOK & LOOK STRAPS
Zip the VelvetPOD cover up and
7
adjust the snugness using the elastic
drawstring located underneath the
top flap to create a smaller
enclosure around your child's face.
To further envelop your child's head,
8
connect the side flaps to the hood
with the hook & loop fasteners.
4
Seat your child on the VelvetPOD in
the car seat and fasten the safety
harness as per manufacturer's
instructions.
5
Zip the VelvetPOD cover up.
Use the hook & loop straps located on
5
the sides of the front panel cover to
attach to sidebars.
6
Use the elastic drawstring located
underneath the top flap to adjust the
snugness.
MOUNTING SLIP TO
BACK SIDE OF HOOD
HOOK & LOOP STRAPS
5-POINT HARNESS
OPENING
3 ADAPTABLE SHOULDER
HARNESS SLITS
2 ADAPTABLE CROTCH
HARNESS SLITS
ANTI SLIP BACK