AFFIX MADW 920-AGR Instrukcja montażu - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Pulpit AFFIX MADW 920-AGR. AFFIX MADW 920-AGR 20 stron. Aluminium double width mobile towers

Drukuj stronę
AFFIX MADW 920-AGR Instrukcja montażu
STABILIZERS
Stabilizers are to be used, when specified, to guarantee
the structural stability of the tower.
Fig. 01
Fig. 01
Fig. 01
Fig. 01
Lightly tighten the upper clamp of the stabilizer on each corner vertical posts at a height where
the foot is touching the ground. Position the clamp of the lower arm such that the lower arm
is as horizontal as possible.
Fig. 02
Fig. 02
Position the stabilizers so that the footpads are approximately equidistant from each other.
Adjust the stabilizers and reposition the clamps as required to make firm contact with the
ground. When in correct position, tighten all the clamps firmly.
Fig. 03
Fig. 03
To position a tower against a wall, do not remove the stabilizer, move parallel to the wall.
Fig. 04
Fig. 04
To position a tower in the corner of walls, remove the corner stabilizer and place the two towards
the wall, parallel to the wall. The middle one should be placed as shown in the graphic Fig.04
Fig. 02
Fig. 02
Fig. 04
Fig. 04
15
Fig. 03
Fig. 03