7inova 7R100 Instrukcja szybkiej instalacji

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Router sieciowy 7inova 7R100. 7inova 7R100 1 stron. Battery powered wifi 3g router 150m

Drukuj stronę

Quick Installation Guide

Battery Powered Wifi 3G Router 150M

Model: 7R100

Before you start to use this device, please check if there's anything

missing in the package, and contact your dealer of purchase to claim

for missing items:

Package Contents:

1x 7R100 Battery powered Wifi 3G Router

1x USB Charging Cable

1x Quick Installation Guide

5 IN 1:

Power bank,3G Hotspot, Mini AP, cloud storage, multimedia share.

Product pictures are only for reference and please consult the objectives.

7inova 7R100 battery powered wifi 3G router moves your 3G internet .When Plug 3G modem into 7R100's

USB port, it will create 3G hotspot, and broadcast a wireless signal at up to 150Mbps.access the internet

to multiusers or devices simultaneously. When work as a wifi router, it can works in 3G, AP, Router,

Repeater mode, providing an excellent solution for users various network need.

Overview

LED indicator

Charging Port

Charging Light

USB interface:

Connect 3G card, cell phone

charger, external U disk

Charging Instruction (mobile power)

● Powering off for charging: Push the switch to gear C, then select the correct tip for your device and

connect the charger lead of the digital product to the USB port. Then it will charge the intelligent

mobile phone of iPhone, iPad and other smart phone.

● Powering on for charging: Push the switch to gear R, then selectthe correct tip for your device and

connect the charger lead of the digital product to the USB port. Then it will charge the intelligent

mobile phone of iPhone and other smartphone. The charge current is 500mA.

● Charging the Power Bank: Connect the Micro USB tip to the Input port of the Power Bank, then

plug the USB connector into an empty USB port on your Laptop/PC, or other USB power

equipment.

Check power method

● Method to see the battery electric quantity: no matter what condition 7R100 is in, press the display

button of electric quantity (beside the switch) and then observe the electric quantity according to

the indication status of the electric quantity lights (if four lights are on, it shows that the battery is

fully charged).

● Method to see the battery with a full charge: charging is done under the condition of powering off,

if the blue light is one, it indicates charging and if the blue light is off, it shows that the battery is

fully charged.

Instruction to the connection of the wireless network

Computer Configuration

(Before configuring, first ensure your PC has installed wireless LAN card)

1. Click"Start→Control Panel→Network and Internet→Network and Sharing Center→Change

adapter settings→Wi-Fi(right click)→Properties"

2. Double click"Internet Protocol Version 4(TCP/IPv4)"

3. Select "Obtain an IP address automatically" and "Obtain DSN server address automatically".

Click "OK". Back to the last interface and click "OK"

Connect To Wireless Network

(Note: You have to get device connected wirelessly firstly then can login Web browser)

After Wireless LAN card

Select the SSID of your target

installed successfully,

network from the displayed list

click

icon on the lower

and click"Connect" and input

right corner of desktop.

password "12345678"(Default).

Not connected

Connections are available

Wi-Fi

7inova-535060

Information sent over this network might

be visible to others.

Connect automatically

7inova-535050

7inova-521635

Open Network and Sharing Center

Power on

Charging

Power off

Battery Indicator Button

Battery Indicator Light

Restore factory settings

RJ45 Port

When shows:"Connected",

means your computer has

connected to wireless

network successfully.

Currently connected to:

7inova_535060

Wi-Fi

7inova-535060

Connected

Disconnect

Connect

7inova-535050

7inova-521635

Open Network and Sharing Center

WiFi Setting

Through WIFI, connect the Internet device wirelessly to 7R100, input 192.168.169.1 into the

address bar of the device's browser and enter the management interface.

Modify the WIFI Name and Password

and Channel in the interface of wireless

setting.

The setting of all network model

The setting of 3G wireless Modem

● Push the switch to gear R. The default network mode is intelligent. Insert the wireless network card

into the USB port. The device will connect to the Internet through automatic dial without any

setting.

● When the status indicator for 7R100 is "Blue light is on continuously" it means the direct dial is

successful. Through WIFI, connect the Internet device wirelessly to 7R100 and the Internet can

be visited.

Network setting for Smart ADSL

● Dial Smartly: Push the switch to gear R. Under the intelligent mode, connect the LAN port of modem

to network port of 7R100 through the network cable. Input any web address, 7R100 will push dial web

smartly . Input user name and password, and then 7R100 will do the dial process.

● Dial manually: Through WIFI, connect the Internet

device wirelessly to 7R100, input 192.168.169.1

into the address bar of the device's browser

then enter the management interface. Click

"ADSL", input the ADSL account and password,

then click "Apply", then the network will restart,

just connect it again, "Blue light is on continuously"

then the internet can be visited.

● Turn off the Smart ADSL

Network setting for the hotel

● Push the switch to gear R. Under the intelligent mode, connect the network cable of the hotel or LAN

port of upper-level router to network port of 7R100.

● Through WIFI, connect the Internet device wirelessly to 7R100. When the status indicator for 7R100

is "Blue light is on continuously" it means the network connection is successful and the Internet can

be visited.

Network setting for static IP and DHCP

● Push the switch to gear R. Connect LAN port of upper-level router to the WAN port of 7R100.

● Through WIFI, connect the internet device wirelessly to 7R100, input 192.168.169.1 into the

address bar of the browser then enter the setting interface of 7R100, click "Conn to Router", choose

the mode of wireless router and input relevant parameter, then click "Apply". After restart, just

connect it again, then the internet can be visited.

Network setting for WiFi Repeater

● WiFi Repeater can enlarge upper router signal.

Multi-Media Sharing and Cloud Storage

Multi-Media function support Samba protocol, Can realize single or more multimedia file sharing.

IOS Platform:

You can user GoodPlayer, Aceplayer, and Kuluo etc support Smaba.

Open "Goodplayer", click

, then in "SMB/CIFS Client" option to add the server address

192.168.169.1, User name admin, password admin, then save and enter.

After enter the server, you will see the all documents, select the appropriate file to brower, edit,

playback, upload, and download

Android Platform:

You can user GoodPlayer,Aceplayer,and Kuluo etc support Smaba.

Download and install "ES File Browser"

Open"ES File Browser", click"Share", choose "Menu" - > "New" server, location 192.168.169.1,

username admin, password admin, confirm and save

Enter the server, select the appropriate file photo browsing, document editing, audio and video playback

In the "Local" long press the corresponding file "Copy to", "Move to" upload the local files to the server.

After enter the server, long press the corresponding file "Copy to ", "Move to" operation can download

the server file to local

PC:

Enter web page, then click

enter to server.

Update Firmware

All configuration information will be lost after you

restore factory defaults. Factory default will not

change the SSID that user set .

Insert an object with sharp ends into the small

hole as the Overview shows "R", press it for

more than five seconds, stop pressing when the

red light is one for an emergency and wait for

the restart of the device. If the red light flashes

per one seconds, the restoration of factory

defaults is successful. All the settings will be

restored to the factory defaults. Wireless

connection shall be done again.

Restore factory defaults

All configuration information will be lost after you restore factory defaults. Factory default will not change the

SSID that user set .

Insert an object with sharp ends into the small hole as the Overview shows "R", press it for more than five

seconds, stop pressing when the red light is one for an emergency and wait for the restart of the device. If

the red light flashes per one seconds, the restoration of factory defaults is successful. All the settings will be

restored to the factory defaults. Wireless connection shall be done again.